Your attic is the biggest energy liability in your Southwest Florida home. In peak summer, attic temperatures in Naples regularly exceed 150°F. If your attic insulation is old, thin, or missing entirely, that heat is radiating straight into your living space — and your AC is running overtime trying to keep up.
Blown-in attic insulation is the fastest, most cost-effective way to fix that. Ideal Insulation has been installing blown-in insulation throughout Naples, Fort Myers, Cape Coral, and the surrounding SWFL region since 2013. We're an FPL Preferred Contractor with 9 trucks and 20 installers — and in most cases, we can have your attic fully insulated the same week you call.
Why Blown-In Insulation Is Naples' Most Popular Attic Solution
Blown-in insulation is the go-to attic solution for Naples homeowners for good reason. It's fast, it works, and it doesn't require any major construction. Here's why it's our most requested service:
- Perfect coverage for irregular attics. Naples homes often have attics with joists, cross-bracing, HVAC equipment, and ductwork running through them. Blown-in fiberglass fills in and around every obstacle, providing consistent coverage without gaps.
- Adds to existing insulation. If you have some insulation but it's settled or underfilled, blown-in can be installed directly on top to bring you up to code and performance levels.
- Minimal disruption. Our crew can insulate most attics in a few hours. You don't have to move out. You don't have to gut any rooms. We go in through the attic hatch and get it done.
- Meets Florida Building Code. Naples and the rest of SWFL falls under IECC Climate Zone 1. The FBC requires a minimum of R-30 in vented attics. Blown-in fiberglass gets you there efficiently.
- Immediate comfort improvement. Homeowners consistently notice the difference the first night after installation — rooms that previously felt warm or stuffy stay comfortable with less AC.
How Blown-In Insulation Works
Blown-in insulation is exactly what it sounds like: loose insulation material blown into your attic space through a hose using a specialized machine. Here's the process from start to finish:
- Assessment. We inspect your attic to measure the existing insulation depth, check for air sealing needs, and identify any issues (moisture, damaged decking, inadequate ventilation) that need to be addressed before insulating.
- Air sealing (if needed). Before we blow in insulation, we seal major air leakage points — around recessed lights, plumbing penetrations, and the top plates of interior walls. Air sealing combined with blown-in insulation delivers significantly better results than insulation alone.
- Installation. We run a flexible hose from our truck-mounted machine into your attic and blow fiberglass insulation evenly across the attic floor. Depth gauges ensure consistent coverage.
- R-30 coverage. In Naples/SWFL (Climate Zone 1), Florida Building Code requires R-30 minimum in vented attics. We install to that spec — or above, if you want to maximize performance.
- Cleanup and confirmation. We clean up, confirm depth measurements, and walk you through what was done.
Material: We primarily use fiberglass blown-in for Naples homes. Fiberglass doesn't settle as much as cellulose over time, is resistant to moisture, and performs well in the heat of a SWFL attic.
Blown-In vs Spray Foam — Which Is Right for Your SWFL Home?
This is one of the questions we get most. Here's a straightforward breakdown:
|
Blown-In |
Spray Foam |
| Best for |
Vented attic floors, quick upgrades |
Roof decks, unvented attics, walls |
| R-value |
R-30 to attic floor |
R-6.5-7.0/inch (closed cell) |
| Air sealing |
With add-on air sealing step |
Built-in — excellent |
| Cost |
Lower upfront |
Higher upfront, faster payback |
| Installation time |
Few hours |
Few hours to half day |
| Disruption |
Minimal |
Minimal (24hr ventilation required) |
Our recommendation: For a standard vented attic in a Naples home that just needs more insulation, blown-in is the smart, efficient choice. If you're dealing with an unvented attic, HVAC equipment in the attic, or an older home with significant air leakage, spray foam may be the better long-term solution.
Not sure which is right for your home? That's what our free estimate is for. We'll look at what you have, what you need, and give you an honest recommendation. Call 239.455.2002.
Signs Your Attic Needs New Blown-In Insulation
Most Naples homeowners don't get into their attic very often — so insulation problems can go unnoticed for years. Here are the warning signs that your attic insulation is failing:
- Your AC runs constantly but never quite keeps up. If your upstairs rooms or the rooms closest to the ceiling are always warm, heat transfer through the attic is likely the culprit.
- Your FPL bills are climbing every summer. Cooling costs in Naples should track closely with weather. If your bills are spiking disproportionately, your building envelope — including attic insulation — may be failing.
- You can see the attic joists. If you peek into your attic and can see the tops of the floor joists, your insulation has settled or is simply too thin. In Climate Zone 1, you need insulation deep enough to cover the joists and then some.
- Your home was built before 2000. Older SWFL homes were built to the energy code standards of their era — which are significantly lower than today's requirements. Most pre-2000 attics in Naples are dramatically under-insulated by current FBC standards.
- There's visible moisture damage or mold. While blown-in insulation isn't a moisture fix on its own, damaged insulation is a sign of larger problems. We'll identify the source and recommend the right solution.
- You had hurricane damage. Wind-driven rain intrusion can soak and ruin attic insulation. If you had any roof penetration during a storm, have your attic inspected.
What to Expect During Installation
We know your time matters. Here's how a typical blown-in insulation install goes with Ideal Insulation:
- Scheduling: We offer 24-hour estimates. Most Naples-area jobs can be scheduled for the same week.
- Arrival: Our crew arrives on time with all equipment. We don't subcontract — your installer is an Ideal Insulation employee.
- Duration: Most attic blow-in jobs take 2–4 hours from setup to cleanup. Larger homes or those requiring significant air sealing work may take longer.
- While we work: You can stay home. We access the attic through the hatch and work from up there — there's no need to clear out rooms or move furniture.
- After installation: We walk through what was done, confirm insulation depth, and answer any questions. No mess left behind.
- Same-day results: There's no curing time, no off-gassing period, no disruption to your daily routine. Your attic is insulated and effective from the moment we finish.
FPL Rebates for Blown-In Insulation
As an FPL Preferred Insulation Contractor, Ideal Insulation can help Naples and Fort Myers homeowners access Florida Power & Light's energy efficiency rebate programs for qualifying insulation upgrades.
Rebate availability and amounts change periodically based on FPL program terms, but attic insulation upgrades have historically been among the most rebate-eligible improvements homeowners can make. We'll review what's currently available during your free estimate and handle the documentation on our end.
The bottom line: blown-in insulation already offers strong return on investment through lower monthly cooling costs. FPL rebates make it even better. Call us at 239.455.2002 and we'll walk you through what you qualify for.
FAQ — Blown-In Insulation in Southwest Florida
Q: What R-value do I need for my attic in Naples, FL?**
Naples and all of SWFL falls in IECC Climate Zone 1. Florida Building Code requires a minimum of R-30 for vented attic assemblies. We install to R-30 as our baseline. If you want to go beyond code for maximum performance, we can discuss that during your estimate — but R-30 is the floor, not the ceiling.
Q: How long does blown-in insulation last in Florida's climate?**
Fiberglass blown-in insulation is resistant to moisture and doesn't provide a food source for mold or pests. In a properly ventilated attic, it can last 20–30 years. It does settle slightly over time, which is why we install it thick enough to account for settling and still hit R-30. If you're in an older home, there's a good chance your current blown-in has settled to well below the minimum — worth having us check.
Q: Will blown-in insulation help my allergy symptoms?**
It can. Air sealing combined with adequate insulation reduces the infiltration of outdoor air (and the pollen, humidity, and pollutants it carries) into your home. A tighter, better-insulated home often means your HVAC filter is doing more of the work keeping your indoor air clean.
Q: Can you install blown-in insulation over my existing insulation?**
Yes, in most cases. If your existing insulation is dry, undamaged, and not contaminated with mold or pest activity, we can blow new fiberglass directly on top to bring your attic up to R-30. If the old insulation is damaged or problematic, we'll recommend removal first — we handle that service as well.
Q: Do I need to do anything to prepare before your crew arrives?**
Not much. Make sure we have clear access to your attic hatch and that there's a path to it through the garage or hallway. If you have items stored in the attic that you want protected or moved, let us know when you schedule. We'll handle the rest.
Q: How do I know if I qualify for FPL rebates?**
The easiest way is to ask us during your free estimate. As an FPL Preferred Contractor, we're up to date on current rebate programs and eligibility requirements. We'll tell you what you qualify for and what documentation we need. There's no cost to find out.
Book Your Free Thermal Leak Scan — A $199 Value
Not sure if blown-in is the right call, or want to see exactly how much heat is getting into your home? We'll do a free thermal leak scan using infrared imaging to show you in real time where your attic is losing the battle against the SWFL heat.
The scan is free. The upgrade pays for itself.
Call or text 239.455.2002 to schedule your free estimate and thermal scan. We cover Naples, Fort Myers, Cape Coral, Bonita Springs, Marco Island, Estero, and all of Collier, Lee, and Charlotte counties.
Ideal Insulation Inc.
Naples, FL | Serving all of Collier, Lee & Charlotte Counties
📞 239.455.2002
Licensed · Insured · FPL Preferred Contractor · Since 2013
Explore More Insulation Services
Spray Foam Insulation Naples · Crawl Space Encapsulation · Fort Myers Insulation · Insulation Cost Guide · FPL Rebates 2026
Get a Free Estimate → | 📞 (239) 455-2002
.png?width=250&height=177&name=Untitled%20(1).png)
