--- title: Spray Foam Insulation Fort Myers FL | Ideal Insulation description: "Spray foam insulation in Fort Myers and Lee County since 2013. Open-cell and closed-cell for attics, new builds and metal buildings. 4.8★ on Google. Written estimates: (239) 455-2002." --- [Skip to content](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#main) [IDEAL INSULATION](https://www.idealinsulationinc.com/) [Services](https://www.idealinsulationinc.com/#services)[For builders](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#builders)[(239) 455-2002](tel:+12394552002) [Home](https://www.idealinsulationinc.com/) / Spray foam insulation · Fort Myers Lee County · Southwest Florida # Spray foam insulation in Fort Myers, FL Since 2013, Ideal Insulation has installed open-cell and closed-cell spray foam for Southwest Florida homeowners and builders, including attics, new construction, remodels and metal buildings in Fort Myers and across Lee County. You get a written scope that says exactly what is sprayed, how thick, and what is excluded, so you can compare quotes line for line. [Get a Spray-Foam Estimate](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#estimate)[Request a Builder Bid](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#builders) ## Planning an attic upgrade? Tell us about the existing insulation, roof condition, attic access and any planned HVAC or roof work. Those details help separate an insulation upgrade from repairs that need to happen first. [Request a Fort Myers spray-foam estimate →](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#estimate) [4.8★ on Google](https://www.google.com/maps?cid=11112714668545867645)Since 2013Naples-based, serving Fort Myers and Lee CountyOpen-cell & closed-cellWritten estimates Completed project · North Fort Myers · September 2026 ## Open-cell spray foam for a North Fort Myers woodshop Ideal completed open-cell spray foam at the roof and side walls of a woodshop in North Fort Myers. For a workshop estimate, include the roof and wall details, how the space will be used and any areas outside the insulation scope. ## A Fort Myers insulation project starts with the existing building For an existing home, a useful estimate begins with what is already there. We need to understand the insulation location, access, visible damage and planned changes to the roof or HVAC system. Hot rooms can have more than one cause, so an insulation proposal should state which parts of the building it addresses. Our team is based in Naples at 4950 Golden Gate Pkwy and works in Fort Myers and the rest of Lee County; there is no separate Fort Myers office. We also install spray foam across the river in [Cape Coral](https://www.idealinsulationinc.com/services/spray-foam-insulation-cape-coral-fl). Homeowners can start with photos and property details. Builders can send plans and specifications. ### Existing attic upgrades Decide whether the project keeps insulation at the attic floor or changes to a roof-deck assembly. Existing coverage, ventilation, ductwork and access affect that choice. Spray foam is one option; an attic-floor upgrade may call for a different material. [Compare attic insulation options in Fort Myers →](https://www.idealinsulationinc.com/services/attic-insulation-fort-myers-fl) ### New construction and remodeling Coordinate spray-foam access before wall and ceiling cavities are closed. The estimate should identify each assembly, the specified product or performance, and how work fits around framing, electrical, plumbing and HVAC. [Send plans for a builder estimate →](https://www.idealinsulationinc.com/insulation-contractor-for-builders-naples-fl-swfl) ### Commercial and metal buildings A metal-building proposal should account for the substrate, intended use, existing condensation or roof problems, and the specified coating or protection system. Include drawings and operating requirements when requesting a bid. [Discuss commercial insulation →](https://www.idealinsulationinc.com/commercial-insulation-contractors-naples-swfl-energy-efficiency) ![Closed-cell spray foam insulation between the roof purlins of a metal building](https://www.idealinsulationinc.com/hs-fs/hubfs/raw_assets/public/ideal-insulation-theme/images/home-2026/foam-purlins-800.jpg?width=744&height=992&name=foam-purlins-800.jpg) Closed-cell spray foam between the roof purlins of a metal building. Installed by Ideal Insulation. ![Spray foam insulation covering the roof deck and end wall of a steel garage building](https://www.idealinsulationinc.com/hs-fs/hubfs/raw_assets/public/ideal-insulation-theme/images/home-2026/foam-garage-800.jpg?width=700&height=525&name=foam-garage-800.jpg) Spray foam at the roof deck and end wall of a steel garage building. Installed by Ideal Insulation. ## Open-cell vs. closed-cell spray foam Start with the assembly and the product documentation. The material name alone does not define a complete insulation system. | What to compare | Open-cell spray foam | Closed-cell spray foam | | --- | --- | --- | | Material | Lower-density foam with a softer structure. | Denser, more rigid foam. | | Space for insulation | Generally needs greater thickness for the same R-value. | Generally provides more R-value per inch where space is limited. | | Moisture behavior | More vapor-permeable; the assembly still needs a moisture-control plan. | More resistant to vapor movement; exact performance depends on the product and installed thickness. | | Selection | Choose from the building plans, roof or wall assembly, available depth, product documentation and project requirements. Neither is the automatic choice for every Florida building. | | The specified product determines the actual R-value, approved applications and installation requirements. General background: [U.S. Department of Energy insulation guide](https://www.energy.gov/sites/default/files/2023-03/insulation_guide_0.pdf). ## What affects a Fort Myers spray-foam estimate? Compare the scope before comparing the total. Two quotes may cover different areas, foam types or thicknesses. Existing-home preparation can also differ substantially from work in an open building shell. - **Measured spray area:** roof slopes, walls and other included surfaces—not just the house’s floor area. - **Specified system:** foam product, thickness, required performance and any additional protective layers. - **Site readiness:** existing insulation, access, protection of occupied spaces and coordination with repairs. - **Project logistics:** building use, scheduling restrictions and the installation sequence. Ask for the included work, exclusions and preparation responsibilities in writing. A dependable estimate needs the property details or plans; a city-wide price guarantee cannot account for every building. ## What happens before installation? 1. **Share the project.** Send the property details, photos or plans, and explain the work you are considering. 2. **Define the assemblies.** Review the surfaces, existing conditions and product requirements so the proposal has a clear scope. 3. **Review the written estimate.** Confirm preparation, included work, exclusions and any related tasks before scheduling. 4. **Coordinate the work.** Agree on access, site readiness, ventilation and the manufacturer’s re-entry instructions for the selected system. For background on application planning and re-entry, see [EPA’s spray-foam ventilation guidance](https://www.epa.gov/sites/production/files/2015-08/documents/spf-ventilation.pdf). ## Fort Myers neighborhoods we insulate We work across Fort Myers and Lee County: older homes along the McGregor corridor and in Whiskey Creek, Iona and the area toward Fort Myers Beach, newer neighborhoods in Gateway and San Carlos Park, North Fort Myers, Buckingham, Fort Myers Shores and [Lehigh Acres](https://www.idealinsulationinc.com/services/insulation-contractor-lehigh-acres-fl). To the west we serve [Sanibel and Captiva](https://www.idealinsulationinc.com/services/insulation-contractor-sanibel-captiva-fl). Some Lee County homes are still being repaired or rebuilt after Hurricane Ian. If insulation was wet or contaminated, it should be removed and the cause fixed before anything new goes in. For new construction and major rebuilds, the insulation scope has to meet the current Florida Building Code; our [Collier and Lee County building-code guide](https://www.idealinsulationinc.com/insulation-blog/florida-building-code-insulation-requirements-2026-collier-lee-county-builder-guide) covers the requirements. ### Fort Myers insulation resources - [Spray foam in Fort Myers: a homeowner guide](https://www.idealinsulationinc.com/insulation-blog/spray-foam-insulation-fort-myers-fl) - [Attic insulation in Fort Myers: which type fits your attic](https://www.idealinsulationinc.com/insulation-blog/attic-insulation-fort-myers-which-type-is-best) - [Choosing an insulation contractor in Fort Myers](https://www.idealinsulationinc.com/insulation-blog/insulation-contractor-fort-myers-fl-13-years-local-ideal-insulation) - [All Southwest Florida areas we serve](https://www.idealinsulationinc.com/areas-served-swfl) For builders and general contractors ## Send the plans. Define the insulation scope. Include the project location, relevant plan sheets, specifications and bid deadline. Identify roof-deck, wall and floor assemblies and any materials already specified. For a useful bid comparison, confirm thickness or performance, preparation, access, protective layers and the work excluded from each proposal. [Request a Builder Bid](https://clienthub.getjobber.com/hubs/d0e0f91b-8c25-49dd-9fb4-6813040a7759/public/requests/1850662/new)[Email Your Plans](mailto:estimates@idealinsulationinc.com?subject=Spray%20foam%20bid) ## Spray-foam questions from Fort Myers property owners How much does spray foam insulation cost in Fort Myers? It depends on the measured spray area, not the home’s floor area. The main factors are the surfaces sprayed, open-cell or closed-cell foam, the installed thickness, removal of existing insulation, access and site readiness. We provide a written estimate that itemizes those so you can compare quotes line by line. Our [Naples and Fort Myers insulation cost guide](https://www.idealinsulationinc.com/insulation-cost-guide-naples-fort-myers-fl) explains each factor. Open-cell or closed-cell for a Fort Myers attic? It depends on the assembly, the required performance and the available depth. Open-cell is vapor-open and needs more thickness for the same R-value; closed-cell gives more R-value per inch and resists vapor movement. Ask which product is proposed, at what thickness, and why it suits your roof. Should a Fort Myers attic use spray foam or blown-in insulation? That depends on the intended assembly. Blown-in insulation is commonly used at the attic floor in a vented attic. Roof-deck spray foam is a different approach that needs coordination with ventilation, moisture control and HVAC. Compare the assembly and scope rather than assuming one material suits every attic. Is spray foam worth it in Florida humidity? It can be, when the assembly is designed for it. Foam at the roof deck keeps the attic, ductwork and air handler out of hot, humid attic air, but the sealed attic then needs humidity control, and the AC may need to be reviewed for the new load. We explain what a scope is designed to do rather than promise a saving. Will spray foam repair a roof leak or storm damage? No. Roof leaks, damaged materials and other building problems need appropriate repair. Insulation should not conceal an unresolved moisture problem, and spray foam is not a substitute for structural repairs or a hurricane-protection design. Will spray foam lower my electricity bill by a fixed percentage? No specific saving can be promised from insulation alone. Results depend on the existing building, installation scope, HVAC performance, occupancy and other factors. A clear estimate describes the work instead of guaranteeing a universal bill reduction. Do you need to remove my old attic insulation first? The answer depends on its condition and on the proposed assembly. The estimate should say whether existing material stays, is removed or needs further inspection. Do not assume a roof-deck conversion and an attic-floor top-off have the same preparation requirements. How long does a spray-foam job take, and when can we re-enter? It depends on the size of the job, access and whether old insulation comes out first; the written estimate sets out the plan. Discuss occupied areas, protection, ventilation and the selected foam manufacturer’s re-entry guidance before work starts. Project conditions and the product determine the instructions and schedule. Do you serve North Fort Myers, Lehigh Acres and Cape Coral? Yes. Our Naples-based team serves Fort Myers, North Fort Myers, Lehigh Acres, Cape Coral and the rest of Lee County. Include the project address when you request an estimate. Do you handle Fort Myers builder and commercial bids? Yes. Send the plans, project location, insulation requirements and bid deadline. Include the intended building use and any access or scheduling constraints so those details can be addressed in the scope. Start your project ## Request a Fort Myers spray-foam estimate Share your contact details below. To help us discuss the scope, have the property address, project type and any plans or photos ready. Explore our [Naples and Fort Myers insulation cost guide](https://www.idealinsulationinc.com/insulation-cost-guide-naples-fort-myers-fl). [View a completed Marco Island project](https://www.idealinsulationinc.com/services/insulation-company-marco-island-fl#marco-project). **Prefer to call?** [(239) 455-2002](tel:+12394552002) [estimates@idealinsulationinc.com](mailto:estimates@idealinsulationinc.com) Ideal Insulation 4950 Golden Gate Pkwy Naples, FL 34116 Prefer to book directly? [Send your request through our client hub](https://clienthub.getjobber.com/hubs/d0e0f91b-8c25-49dd-9fb4-6813040a7759/public/requests/4221726/new). **Ideal Insulation** [Spray foam in Naples](https://www.idealinsulationinc.com/services/spray-foam-insulation-naples-fl)[Spray foam in Fort Myers](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl)[Spray foam insulation in Cape Coral](https://www.idealinsulationinc.com/services/spray-foam-insulation-cape-coral-fl)[Insulation removal](https://www.idealinsulationinc.com/professional-insulation-removal-naples-fl-emergency-service-ideal-naples-swfl)[Contact Ideal](https://www.idealinsulationinc.com/contact-us-ideal-insulation) © 2026 Ideal Insulation Enterprises Inc. · Serving Southwest Florida [Call (239) 455-2002](tel:+12394552002)[Get an Estimate](https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#estimate) Chat with us ```json { "@context" : "https://schema.org", "@id" : "https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#faq", "@type" : "FAQPage", "mainEntity" : [ { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "It depends on the measured spray area, not the home’s floor area. The main factors are the surfaces sprayed, open-cell or closed-cell foam, the installed thickness, removal of existing insulation, access and site readiness. We provide a written estimate that itemizes those so you can compare quotes line by line. Our Naples and Fort Myers insulation cost guide explains each factor." }, "name" : "How much does spray foam insulation cost in Fort Myers?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "It depends on the assembly, the required performance and the available depth. Open-cell is vapor-open and needs more thickness for the same R-value; closed-cell gives more R-value per inch and resists vapor movement. Ask which product is proposed, at what thickness, and why it suits your roof." }, "name" : "Open-cell or closed-cell for a Fort Myers attic?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "That depends on the intended assembly. Blown-in insulation is commonly used at the attic floor in a vented attic. Roof-deck spray foam is a different approach that needs coordination with ventilation, moisture control and HVAC. Compare the assembly and scope rather than assuming one material suits every attic." }, "name" : "Should a Fort Myers attic use spray foam or blown-in insulation?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "It can be, when the assembly is designed for it. Foam at the roof deck keeps the attic, ductwork and air handler out of hot, humid attic air, but the sealed attic then needs humidity control, and the AC may need to be reviewed for the new load. We explain what a scope is designed to do rather than promise a saving." }, "name" : "Is spray foam worth it in Florida humidity?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "No. Roof leaks, damaged materials and other building problems need appropriate repair. Insulation should not conceal an unresolved moisture problem, and spray foam is not a substitute for structural repairs or a hurricane-protection design." }, "name" : "Will spray foam repair a roof leak or storm damage?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "No specific saving can be promised from insulation alone. Results depend on the existing building, installation scope, HVAC performance, occupancy and other factors. A clear estimate describes the work instead of guaranteeing a universal bill reduction." }, "name" : "Will spray foam lower my electricity bill by a fixed percentage?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "The answer depends on its condition and on the proposed assembly. The estimate should say whether existing material stays, is removed or needs further inspection. Do not assume a roof-deck conversion and an attic-floor top-off have the same preparation requirements." }, "name" : "Do you need to remove my old attic insulation first?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "It depends on the size of the job, access and whether old insulation comes out first; the written estimate sets out the plan. Discuss occupied areas, protection, ventilation and the selected foam manufacturer’s re-entry guidance before work starts. Project conditions and the product determine the instructions and schedule." }, "name" : "How long does a spray-foam job take, and when can we re-enter?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "Yes. Our Naples-based team serves Fort Myers, North Fort Myers, Lehigh Acres, Cape Coral and the rest of Lee County. Include the project address when you request an estimate." }, "name" : "Do you serve North Fort Myers, Lehigh Acres and Cape Coral?" }, { "@type" : "Question", "acceptedAnswer" : { "@type" : "Answer", "text" : "Yes. Send the plans, project location, insulation requirements and bid deadline. Include the intended building use and any access or scheduling constraints so those details can be addressed in the scope." }, "name" : "Do you handle Fort Myers builder and commercial bids?" } ] } ``` ```json { "@context" : "https://schema.org", "@id" : "https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl#service", "@type" : "Service", "areaServed" : [ { "@type" : "City", "containedInPlace" : { "@type" : "AdministrativeArea", "name" : "Lee County, Florida" }, "name" : "Fort Myers" }, { "@type" : "Place", "name" : "North Fort Myers" }, { "@type" : "Place", "name" : "Gateway" }, { "@type" : "Place", "name" : "San Carlos Park" }, { "@type" : "Place", "name" : "Iona" }, { "@type" : "Place", "name" : "Fort Myers Shores" }, { "@type" : "Place", "name" : "Buckingham" }, { "@type" : "Place", "name" : "Lehigh Acres" } ], "description" : "Open-cell and closed-cell spray foam insulation in Fort Myers and Lee County, FL since 2013: attics, new construction, remodels and metal buildings.", "hasOfferCatalog" : { "@type" : "OfferCatalog", "itemListElement" : [ { "@type" : "Offer", "areaServed" : "Fort Myers, FL", "itemOffered" : { "@type" : "Service", "name" : "Open-cell spray foam insulation" } }, { "@type" : "Offer", "areaServed" : "Fort Myers, FL", "itemOffered" : { "@type" : "Service", "name" : "Closed-cell spray foam insulation" } } ], "name" : "Spray foam insulation in Fort Myers" }, "name" : "Spray Foam Insulation in Fort Myers, FL", "provider" : { "@id" : "https://www.idealinsulationinc.com/#business", "@type" : "HomeAndConstructionBusiness", "address" : { "@type" : "PostalAddress", "addressCountry" : "US", "addressLocality" : "Naples", "addressRegion" : "FL", "postalCode" : "34116", "streetAddress" : "4950 Golden Gate Pkwy" }, "email" : "estimates@idealinsulationinc.com", "foundingDate" : "2013", "geo" : { "@type" : "GeoCoordinates", "latitude" : 26.1793147, "longitude" : -81.7073091 }, "legalName" : "Ideal Insulation Enterprises Inc", "name" : "Ideal Insulation", "openingHoursSpecification" : [ { "@type" : "OpeningHoursSpecification", "closes" : "20:00", "dayOfWeek" : [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday" ], "opens" : "08:00" } ], "sameAs" : [ "https://www.google.com/maps?cid=11112714668545867645" ], "telephone" : "+12394552002", "url" : "https://www.idealinsulationinc.com/" }, "serviceType" : "Spray Foam Insulation", "url" : "https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl" } ``` ```json { "@context" : "https://schema.org", "@type" : "BreadcrumbList", "itemListElement" : [ { "@type" : "ListItem", "item" : "https://www.idealinsulationinc.com/", "name" : "Home", "position" : 1 }, { "@type" : "ListItem", "item" : "https://www.idealinsulationinc.com/services/spray-foam-insulation-fort-myers-fl", "name" : "Spray Foam Insulation Fort Myers", "position" : 2 } ] } ```