Insulation Subcontractor for Builders & GCs in Naples and Southwest Florida

Spray foam, batt and blown-in for new construction in Collier and Lee.

Send the plan set and get a per-assembly bid: product, installed thickness and coverage on each line, with the install window planned around your dry-in and inspection sequence.

Ideal Insulation has worked with builders and general contractors from our Naples shop at 4950 Golden Gate Pkwy since 2013.

Spray Foam, Batts & Blown-In Insulation for New Construction
Installation Schedule Agreed for Your Project
Project-Specific Written Pricing Based on Plans and Scope
Installation Planned Around Your Drawings and Inspection Requirements
Serving Naples, Bonita Springs, Fort Myers, Estero & All SWFL

Hablamos Español

Send plans for a builder bid

Use the form below, or email your plans to estimates@idealinsulationinc.com.

If the form does not load, use our contact page or call (239) 455-2002.

How a builder bid works here

  1. Send the set. Upload or link the plans (PDF or ZIP), the energy compliance form (R402, R405 or R406) if you have it, the project address and the bid due date. For large sets, email estimates@idealinsulationinc.com.
  2. We take it off by assembly. Roof deck, attic floor, frame walls, mass walls, floors over unconditioned space and interior sound walls. Each line shows product, installed thickness or depth, and coverage, so your estimator can compare like with like.
  3. You get a written bid and a schedule window. The bid states what is included, what is excluded, and what the site needs to be ready: dried-in, MEP rough complete and the inspection sequence. Tell us your due date and we schedule estimating around it.
  4. Install, inspection, close-out. Direct communication with your superintendent or project manager. We install to the approved compliance form and leave the insulation certificate where the code requires it.

Built to the Florida Building Code, 8th Edition

Collier and Lee are Climate Zone 1 under the Florida Building Code, 8th Edition (2023). Under the 2023 residential prescriptive table that means R-30 at the ceiling and R-13 in wood-frame walls; mass (CMU) walls carry their own, lower table values, and many Southwest Florida builders use the R405 performance path instead. We bid to whichever path is on your approved energy form, match product and thickness to it, and flag anything in the set that would not pass as drawn.

Spray foam at an unvented roof deck, batts in frame walls, blown-in over flat attics and rockwool for sound walls are all installed by our own crews, so there is no second insulation sub.

Full guide: Florida insulation code requirements 2026 for Collier & Lee builders. Guía en español: código de aislamiento de Florida para constructores.

What builders get from Ideal

New Construction Insulation Services for Builders Throughout Southwest Florida

Ideal Insulation provides complete insulation installation services for builders, general contractors, and developers in Naples, Fort Myers, Bonita Springs, and throughout Southwest Florida. From single-family homes to multi-family developments and commercial buildings, we handle all types of new construction insulation projects.

Spray foam on the roof deck of a metal building, with exposed steel framing
From Ideal’s field-photo collection: spray foam at a metal-building roof deck.

Spray Foam Insulation Installation for Home Builders & Commercial Contractors

Ideal offers open-cell and closed-cell spray foam for residential and commercial projects. The product, installed thickness and application areas should match the building design and project specifications.

Benefits for Builders:

  • • Compare product-specific R-values and installed thickness
  • • Air sealing and insulation in one application
  • • Can reduce heat transfer; energy savings depend on the building and installed scope
  • • Review the insulation specification for each assembly
  • • Written product, thickness and coverage specifications for bid comparison
  • • Product selection coordinated with the moisture-control and assembly design

Best Applications for New Construction:

  • • Entire home thermal envelope (walls, ceilings, floors)
  • • Cathedral ceilings and vaulted areas
  • • Bonus rooms and second-story additions
  • • Commercial buildings and warehouses
  • • Multi-family units and townhomes

Bid basis: measured spray area, specified product, thickness and preparation.

Blown-in attic insulation beside a blue depth ruler and wood framing
From Ideal’s field-photo collection: blown-in attic insulation with a depth ruler.

Blown-In Attic Insulation Services for Home Builders in Naples & SWFL

Blown-in insulation is an option for attic-floor assemblies in new construction. Compare the material, required coverage, access and ventilation details when preparing your bid request.

Our blown-in insulation services include:

  • • Cellulose insulation (recycled content, eco-friendly)
  • • Fiberglass loose-fill insulation (standard for most new construction)
  • • Custom R-value to meet Florida Building Code
  • • Uniform coverage with professional blowing equipment
  • • Attic baffles and ventilation coordination

Why Production Builders Choose Blown-In Insulation:

  • • Scheduling based on attic size, access and preparation
  • • Fastest assembly to inspect on a flat attic
  • • Excellent thermal performance for flat attic spaces
  • • R-value and coverage specified for the project
  • • Options for new construction attic assemblies

Bid basis: attic area, specified material, coverage and access.

Open roof trusses and sheathing over concrete block walls before insulation
Planning-stage field photo: open roof framing before insulation, not a completed batt installation.

Fiberglass & Rockwool Batt Insulation Installation for New Home Construction

Batt insulation remains a reliable, easy-to-inspect choice for wall cavities in new construction homes throughout Southwest Florida. Ideal Insulation installs both fiberglass and rockwool batts for residential and commercial projects.

Batt Insulation Options:

  • • Fiberglass batts (R-13 for 2x4 walls, R-19 for 2x6 walls)
  • • Rockwool (mineral wool) batts (superior sound dampening)
  • • Standard and high-density options
  • • Faced and unfaced varieties
  • • Interior wall sound insulation

Advantages for Builders:

  • • Batts sized to the specified wall cavities
  • • Predictable crew time
  • • Easy to inspect and verify proper installation
  • • Familiar to building inspectors in Naples and Southwest Florida
  • • Match batt dimensions and R-value to the specified assembly

Bid basis: wall and floor assemblies, specified batts and installation scope.

Who we bid for

Custom home builders

Port Royal, Pelican Bay, Marco Island and Estero estates where foam and rockwool assemblies are specified together. See luxury home insulation in Naples and our spray foam and rockwool guide.

Production and multi-family

Phased schedules across Ave Maria, Lehigh Acres and Cape Coral, with batt, blown-in and foam matched to each plan type. Larger multifamily work is covered on our commercial insulation page.

Commercial GCs

Metal buildings, warehouses and tenant build-outs: see commercial and metal-building insulation and our completed Marco Island project.

Builder resources

Builder bid questions

What do you need to bid?

The plan set, the energy compliance form if you have it, the project address, the bid due date, and which assemblies are ours. A wall-section detail saves a round-trip.

Will you install to our R405 performance path?

Yes. We match the product and thickness on the approved energy form and note anything in the plans that differs from it.

Which code do you install to in Collier and Lee?

The Florida Building Code, 8th Edition (2023), Energy Conservation volume. Collier and Lee are Climate Zone 1, and we bid to whichever compliance path is on your approved form: prescriptive R402, performance R405 or ERI R406.

Can you handle multiple lots on a schedule?

Yes. Tell us the lot sequence and phase dates and we schedule crews in Collier and Lee around your superintendent's calendar.

Do you do only spray foam?

No. We install open-cell and closed-cell spray foam, fiberglass and rockwool batts, and blown-in insulation, so one bid can mix assemblies without a second sub.

Hablan español?

Sí. Hablamos español en la oficina y en obra. Llame al (239) 455-2002.

Request a builder insulation bid

Share the project location, insulation scope and bid deadline. Have plans ready for the estimate.

Send plans for a bid

Prefer to send plans? Email our estimating team.

Our Insulation Services

Areas We Serve in Southwest Florida